Recent content by Raymo

Bump, anyone??

It would appear that the cycling has not stopped :cry: Any suggestions?

Ok I have done all the things suggested so I will wait for the systemate to learn the new settings for the boiler and see if my problem has been resolved, many thanks to all it much appreciated :) I will keep you posted on the outcome

Thanks for the reply GT, can you tell me the procedure for setting DHW Pump to max, also you lost me a bit with setting the Boiler to match the CH, how do I find what the CH of the house is, sorry if this is really simple stuff :oops: but am a total noob to all this. Oh btw how long will it...

Right Micky thanks for the info :) I have done that procedure now, can you tell me what results I should be getting?, also when you say 75Deg is not ideal for the thermal store or the boiler what do you mean by that

Micky any chance you could give me some detailed instructions on how to do this, many thanks

Thanks Micky, I have been having it repaired for 4yrs and for a new boiler I dont think its acceptable and reading these forums kind of led me to believe the Baxi boilers are crap, well the model I had anyway, as to the KW output, the original was a 30KW boiler so I just got as near to that...

Cheers TW, Yes its set temp which i achieve with the dial, HW max is 65Deg and the CH is 75Deg and when the boiler fires up it reaches an indicated 75Deg and shuts off then the numbers start falling approx 2Deg per second until it gets down to say 50Deg and the boiler then fires up again and the...

:)

Hi folks, Firstly Id just like to mention that I'm not a plumber and I dont fully understand the techy jargon, so please be patient and I hope someone can help with a problem I've got since a recent boiler change, I have a Gledhill Systemate 2000 in the airing cupboard upstairs and the boiler...