Recent content by Refinedgent

Wonder why they don’t make brown/brick coloured wire tbh

Sounds a bit overkill tbh Will this do, can’t see this HITIF at Screwfix...

Perfect, it’s north facing and large hedge adjacent to it’s never in sunlight, also what gauge is best i‘m assuming 1.5mm is fine? Or is 2.5 the way to go?

Just moved house and there are 4x elderly CFL exterior lights on the side of my house to illuminate the side path, all running through galv conduit. all the lights are broken/rusted, the bulbs have clearly long since blown. I want to replace the setup and remove the conduit as it’s bloody...

Yep totally, better to be safe then sorry! Though I was at the stage that I think I had genuinely exhausted every other possible Avenue. unsure what tests to run to make sure it is now correctly wired up, as the tub is working, and wiring is now running through 2x rcds (both of which work, and...

Yep well aware, but frankly I was reaching end of my patience and didn’t want to shell out yet another call out fee, for what, after much chat here, very much Indictated a swapped N&E wire!

Connected up as shown. See image (black is now correctly wired to EARTH terminal in tub, Grey now to Neutral in tub, and brown to LINE 2 = Live in tub as it should be) my multimeter is completely busted, but I remembered I had a simple pen tester (one of the ones that beeps rapidly and flashes...

Ok, I have a breakthrough! It works! I swapped downstream N and E (which appear to be in corrected labelled) and everything now works as it should I think as you all had cleverly determined, in essence there was a double issue of N and E being incorrectly wired at TUB (error 1) AND N and E...

Does this not also indicate that indeed it likely downstream N and E wires are incorrectly labelled and require reversing?

I know my limits and opening up a multi-fuse CU is where I draw the line I think, not confident in opening it up etc so will wait for Tuesday when I have a proper electrician round to examine it. I’m hoping it’s just as simple as the N and E being wrong way round, my concern is if it is indeed...

So in effect, it may be worth assuming the N and E wires coming from the main CU are in fact incorrectly labelled and are in reverse. I guess I’ll try wiring these up the other way round as they are currently and see if this solves anything

Well indeed, I did think this, I thought hmm the live has been bypassed ok, but the Neutral definitely hasn’t… shouldn’t the switch when flipped turn off the tub? But nope nothing Makes me think, perhaps if the N and E are reversed up stream this would mean in fact currently it’s just the...

My multimeter is not working sigh, so can’t check this currently which is a pain. I have an electrician who is coming Tuesday to fully check it as the hot tub guys are apparently ‘not trained in electrics’ which is somewhat unfathomable but anyway… I think the most likely outcome is N and E...

Yep thick blue goes behind RCD into bottom right (it came wired as such) hot tub Mai trance guy came round and can’t fathom it, he thinks it’s possibly the circuit board, or maybe transformer that’s on the circuit board but cant figure it out as it basically shopulent be working, but clearly...

Yep exactly, so they are swapped from the RCD to the tub