Recent content by rekab6969

Hi, anything like these available in the UK.. SquareFoot SF22 Plastic Unique Concrete Footing Form 22..?? Thx.

Ahhhh. Yes. Thank you. That makes perfect sense, obvious once pointed out. I’ll go with the wet underfloor now. Thank you. db.

Thanks fir your replies. I’ve installed wet type underfloor which was laid on top of kingspan then a 50mm screed laid on top. The whole screed heats up slowly to maintain a constant heat and it modulates by being on for long periods, this is fine in a constantly occupied house. My cabin will...

Hi Guys, Looking to run wet type underfloor heating is the concrete slab of a log cabin build, would also like to have electric above it in a latex screed, is this allowed? Thanks, db.

Update... UK power quoted £22k to upgrade me to true 3ph... This is worse case sinario and they are having a re think... :)

1st prize goes to R F Lighting. Not true 3ph coming in after a lot of chasing to get it checked... 2x 1ph and one doubled up on the same phase.! Anyone want to buy a 3ph compressor.. :( It's been very informative and I have learnt a lot, a big THANKS to everyone who has taken the time to...

1st prize goes to Yorksparks.. :) Not true 3ph coming in after a lot of chasing to get it checked... 2x 1ph and one doubled up on the same phase.! Anyone want to buy a 3ph compressor.. :( It's been very informative and I have learnt a lot, a big THANKS to everyone who has taken the time...

Morning Eric, Thank you for your info.. :) RF lighting.... wise words for sure... Igloo needed to replace the meter, had a panic attack when they saw it was 3ph and sent in the EDF who said it was 3ph but changing meters wasn't their job. Igloo then spent ages compiling a 3ph...

Shopping list.. 16mm double insulated tails x4. Smaller if available. Tick.. 10mm earth tail, one size below above ? Tick. 40amp external isolator switch external to the meter box. requires MCB. Ok. Size to be confirmed. Tick. 40mt of 6mm 5x core...

Shopping list.. 16mm double insulated tails x4. 10mm earth tail. 40amp external isolator switch external to the meter box. 40mt of 6mm 5x core swa. swa gland kits. swa cleats. 4 module wide for 3 phases and neutral. 32amp. Looking ok...?? Cheers, db.

I already have a 3ph meter... :)

Hi Eric, It not my field of expertise for sure, I'm a gas heating engineer but I can't help but think this is being over thought... The incoming supply can be seen as in the photo, the spec for the compressor in posted above, just need to join the two together with suitable sized cable, the...

Hi Simon, Thank you for input, as the compressor runs total 30amp which is split into three I calculate the cable size on 10amp not the full 30amp..? Doncaster Cable online calculator. Multicore 90°C Armoured Thermosetting Insulated Cables Tables Apply to: H6942XL, H6943XL, H6944XL, H6945XL...

Hi Simon, yes I had thought about more equipment in the future. Boys and their toys. this does bring me back to taking too much of the supply coming in at the meter though. There are three 60amp fuses at the moment Could these be upgraded to 100’s & we also have a 30amp AGA. Obviously I...

With a wired in starter (WIS)..... is this going to be a an asset..?