Maybe I will have to cut the dado (will have to check with her highness). This is early stages at the moment. Ultimately, I want to be in a position to get a heat pump when the time comes. The boiler still should have ten years of life in it. I was experimenting with low flow temps last winter...
Thanks for your reply. I need 614 watts at a flow temp of 40C. I will have to do some calculations and find out the correction factor etc.
I don't really want to go higher than 600 as there is a dado rail. 125 wide is certainly too wide. I think I saw a designer K2 rad somewhere that wasn't too...
Hello All
I am wanting to upgrade my hallway radiator to a K2. 600 x 1600. Because of the front door, I am limited to 100mm deep including the brackets. Does such a rad exist? (I cant really go longer with a K1).
Thanks in advance for any help.
RG
Hello All
I made the mistake of getting a thermal camera last year and now I am in full eco mode.
I have a bay window with a small roof over it and you can see the heat is gushing out of the house in winter.
I’m thinking, I would like to lift some tiles and shove some insulation under there...
Hello all
I volunteered to change my partners external front door and frame. The cill is completely rotten and the bottom of both jambs too.
I am thinking it’s easier to change the whole frame and the door too as she wants a new one. The current door is standard 2032mm x 813mm.
Regarding frame...
Hello All
We hod our loft converted some years ago. They didn’t use insulated plaster board by the stairs which is an outside wall (9” solid and rendered).
We get these cold spots in condensation season where the dabs of plaster adhesive are creating bridges. Having done a bit of research, I...