Recent content by richhemmings

I put a new carb on which resolved the leaking from the body, but didn't solve the starting issue. Redid the fuel lines for good measure to get a better line into the carb. I hooked it up to my car which (begrudgingly) started the engine after a few shots of carb spray into the intake - I...

I wondered the same. Google says the engine is gravity fed, but the configuration of the pipe suggests not... there's also a lot of suction form the carb and the fact that fuel is leaking out of the carb body makes me think its not a supply issue. I didn't check the float when I had the carb...

Cheers for the reply Harry, I was of the understanding that if there's spark and the engine turns that all safety's are happy? I know the seat one has been overridden, and I put the grassbox on. The machine is in park (neural) with the handbrake on ...and I triple read the manual for...

Hi all, Looking for some help. I recently bought this Hayter 13/30 (Code 131S) and I saw it running before purchase, and ran it for 2 minutes after delivery... however 3 days later after storing it outside (warm weather, touch of rain under a tarp) - it wont start. My fists suspicion was the...

Have trie the soft BSI reset ant the re-sync suggested above (hold lock button for 10 secs with the ignition on). Nothing working yet.

John - Did you ever fix this? Out pug has just started doing the same. Checked all fuses = OK. Checked ODB2 for faults = All clear When locking with key or fob, a relay can be heard and the 'locking' sound of the boot(?) happens but doors don't lock (and boot wont unlock). Indicators flash. I...