Recent content by rjm2k

Yes it does and no not yet (whole job not complete)

Ok thanks, there was local isolation but they removed it I believe because the tiler didn't want the work of cutting around it

Thanks, it's going to be reworked a little. The light circuit is fed from an MCB on the non RCD protected side of the main CU. The main issues are no FCU on the shaver socket (also has a built-in toothbrush charger) to allow for isolation in the event of a fault that trips the RCD or MCB on...

They are fixing it

Bathroom installation Not DIY RCD(loft) Fed from light circuit (1 or 1.5mm not sure). I can't remember if before this work there was a loop in/out or if this was the end of the circuit . Shaver socket fed from RCD, no fused connector for the shaver socket Digital shower fed via fsu from RCD...

Is it something you would expect a company offering "a highly skilled premium service" paid 14k to do?

Internal side of a wall where the other side is external

Probably a silly question but is tile adhesive suitable for attaching a small piece of plasterboard to an external wall?

Hope this is the right place, so a bathroom fitter did this. 100mm diameter, cut with a 70mm saw but took a few goes presumably due to the 40mm pipe being fussy. 200mm depth joist and 2800mm length. I believe that the horizontal location is ok, however the diameter simply couldn't ever be. Over...

An other, there was already an extractor there so I removed that ready (will use in a different room when need arises) and left the vent pipe which goes to a soffit grill (assuming the fitters who put the soffit in reconnected it). From what I can see, they have used 2.5mm cable, however there...

Sorry, what's a dry tube? How can the joist be repaired? Can that happen around the 40mm pipe?

Shaver socket, digital shower control, extractor fan and 3 led spots

It's frustrating, you think you have gone for a reputable company, pay a fortune and get this :( Add to the list tiling over blown mouldy dot and dab and other generally unsound plasterboard having had tiles hacked off, taking a spur into an RCD from a light circuit (maybe that one's ok) etc...

Pro with 20 years experience apparently Hole in joist is 85cm along a 280cm joist and varies between 10cm and 9cm in diameter. Joist height is 20cm so 6cm remains above and 5cm below. Re coreing the external hole, they did do a nice round core but then it seems they found that the push fit...

Currently having a bathroom refit and wondering if my concerns are valid re the attached photos, the soil pipe connection is being moved under the floor, as shown here the new pipe on the left is pointing upwards which I have a feeling indicates an intention to connect to the original point on...