Recent content by roadhouse1387

Bad Luck Mick, Its always a terrible thing when beer goes to waste, and in such regrettable circumstances... Could have been worse though...it could have been a pint of proper beer, real ale ! :wink: I thought you were going to say you accidently dipped your brush in the lager and it...

Turned the heating up a little and the preassure went up to 2.9, I wonder if repreassurising the expansion vessel is all thats needed here ? Chris, Would you mind sending me the PDF you mentioned at the start of this thread please ? I have read the FAQ and providing the precedure given...

Thanks for that Chris, I will check up on the other threads. The mad thing is that now the boiler is working perfectly ! The preassure has returned to 2 Bar and everything seems back to normal. I have no idea what is happening ..... Many thanks for the help, i will check the other...

Thanks for all the advice. I took the cover off the valve motor and checked that I could move the actuator ok by hand...no problem. I then turned the heating on and saw that the motor turned the valve..the boiler now seems to working ok..! I left it running for a few hours and saw the...

Ok Chris, Thanks for that, I will dig out the diagram and start looking. I will let you know. Many Thanks Shaun

Thanks Chris, I have a good understanding of elecronics so I feel I could do that repair no problem. What testing procedure do you recommend ? Cheers Shaun

Hi All. I have a Worcester Highflow 3.5 Gas boiler which seems to have developed a fault and I thought I would ask you guys for some advice. I will not be attempting any major repairs myself (simple stuff I can do i.e. resetting things, testing and so on), I will leave that to the experts...