Recent content by rob5495

Hi, I had to drain some water from my combi worcester 28 system yesterday. I'm guessing around 20 or 30 litres but I'm not sure. Having very recently learned about inhibitor I'm guessing I need to replace some. It comes in a tube that treats 100 litres. My question is because I don't really...

Sorted it!!! I turned off both valves on all rads apart from the casualty. it got roasting straight away. Turned all valves back on and ta daaaa everything has stayed hot. Whoop whoop!! Thanks for your help. Rob.

Hmmmm..... now I've turned the rest of the rads back on, the one that was cold and has just warmed up has gone back to being cold again!! Arrggghhhh!! Any ideas how to keep it warm please???? Thanks, Rob.

Andy, how do i alter the pump speed? Do you mean bleed the rads or is there another bleed point somewhere? I think the problem is fixed, this is for future reference! Many thanks, Rob.

Mick, you are a star!!! Turned off the rest of the rads and straight away heard big gurgles and the girls rad got hot. The last cold one stayed cold so I repeated the process a couple of times and now the inlet to the rad is mad hot and the rad itself is very slowly warming up and I can hear...

These 2 rads aren't showing any signs of even thinking about getting warm! One of them is my daughters bedroom so i could really do with it working now. The pipes to that one come from the ceiling if that makes any difference. I was wondering if there could be an airlock somewhere? Any...

Hmmm..... hall, 1 bedroom and 2 bathrooms are scorchio now. 2 bedrooms are cold. i guess from the lack of response you're as baffled as me! Just bled the rads again but still just water ,no air. Guess I'll leave it and see if it completely fixes itself!!!

They are getting a bit warmer and there's lots of trickling/gurgling noises in the pipes. This might just sort itself out!! (fingers crossed)

Hi. I had a leak (bad olive) on my hall rad valve. I turned off the stop cock and the good rad valve and after a couple of pans of water later it stopped. I replaced the olives, tightened everything back up, stop cock back on and repressureised the combi ( worcester 28 ) back to 1 bar. I bled...