Recent content by roblatus

Cool, thanks for the advice. I now have a dilemma. Option 1 - Freestanding dishwasher at end of kitchen units,extend fill hose and drain hose as per my above post extend worktop and fit end panel. Option 2 - Fit integrated dishwasher in lieu of a kitchen unit near to sink, move old unit to...

So i wouldn't need the loop on the back of the machine as well? I was going to extend the hose and run it under the kitchen units i.e. along the floor, then up the back of the sink unit and onto the drain spigot.

Hello I wonder if anyone could advise on a query for me. I am looking at installing a dishwasher, however it is not next to the sink. I was intending on purchasing a drain hose extension and have measured the route the hose could take under the kitchen units then over the hardboard back of...

Would that be in compliance with 17th edition regulations??

This is also my own view on the situation. As a first step i will be doing some basic testing and inspection of the system myself. contintuity, insulation resistance and visual checks where possible. Then a consumer unit change, either by myself (after consulting the relevent building reg...

So, if i understand correctly i need to obtain building regs approval for a consumer unit change? Thanks again.

Thanks for the quick replies chaps. I am more than happy to change the consumer unit and am also more than capable of doing it myself and have already identified RCD protection as a must do job when we get moved in. Yes there does appear to be a shortage of sockets so will also need to add a...

I am currently in the process of buying a house built in 1976. I looked at the consumer unit and it is a grey metal box with bakelite circuit breakers in it. There was no sign of any RCD protection. I am wondering what are the chances of this property having aluminium wiring? Or is it...

I have a Legrand / Tenby CU which has a Legrand 80A 30mA RCD protecting the sockets. I am looking to replace the RCD as i believe it may be faulty. Lots of nuisance trips etc. I seem to be having trouble sourcing a Legrand/Tenby one. Is there another manufacturers RCD i can use which has the...

I need to replace this part on my Ideal boiler. Is it just a case of draining the system down, unfastening the pipe that leads to the outside and then unscrewing the valve from the rest of the boiler??? I am also replacing the automatic air vent. Does this just unscrew from the plastic...

I wonder if anyone can answer me this question. If, as an electrician you where contracted to attend a business and disconnect something like a heated towel rail then test it and re-connect it how much would you expect to charge for this. Roughly. Thank you.

Could the existing gully be moved under the kitchen sink? Someone mentioned using something called a Hepworth Access manifold to me, i have no idea what one of these is tbh lol. One builder has indicated that the gully could be left where it is but one of these manifolds used?? If the gully...

We are going to be having a small extension built to the rear of our property. We currently have a gully that the kitchen sink and washing machine drain into that will be inside the new extension. What would be the best way of leaving this gully with an inspection point/cover as it is going to...

The noise does continue even if there is no power to the boiler. I have called the company that originally installed the boiler. My cousin actually fitted it as it was his business,but he has since sold his share to his partner who is coming to take a look this week. One thing i have...

Thanks for the reply. How do i get to view the diagnostic LED's? I am pretty sure the flow limiter is what is making the noise. It has been doing it for a while. Thanks