Recent content by Robson1

Hi Agile, as mentioned in my first post, I have previously set the thermostat to max and at 60 degrees and the same problem occurs. The immersion thermostat is currently set to 60 degress. Out of interest, I've just measured the hot water temp again this time at a bathroom tap all of 18" away...

Just measured the hot water temp with multimeter test probe after having the heating on for most of today and it measures consistently at 58 degress c. As mentioned before, I don't know how accurate these things are?

The only temperature control I have for the water heating and central heating is the control on the redfyre boiler which varies between low and high. There are no other thermostats in the house. It is curently set to low which heats the house nicely to around 21 degrees. As the hot water system...

Got a Redfyre oil fired boiler for central heating and hot water and use immersion occasionally. The boiler has a rotary varying thermostat low-medium-high. I run the thermostat at just above low. There are no other thermostats in the house apart from the themrostat physically on the immersion...