Recent content by Robsop

Thanks Hypothetically though, any comment the cost question.

I have had an issue on my boiler for a while now where I don't get a full flame either when starting up (rads cold or CH not up too temp) or running the DHW. Boiler is a Glowworm 100e The rads do eventually get warm and you can also get hot water if you throttle the flow back. I've...

Quote from Agile in another thread - "I did a power flush for a BG customer (£350) which was totally unecessary!" I rest my case.

In that case then mate, dont bother helping. If you look through my posts I have been polite in asking for some advice or assistance to help diagnose the issue. I have spoken to my plumber (who I have a good relationship with) several time about this but we have been scratching our heads...

Ok, my theory about what is going on here is as follows - Up to about a month ago, boiler was ok but lock out problems occurred after I had it serviced. Because the heat exchangers were cleaned out, I assume that even though the temp setting on the front of the boiler was kept the same, the...

Bump

Firstly, thanks for the help. No, the stat I mean is the room stat. Yes, I reckon that running the hot tap must do that. It wont reset if I dont do that first. My theory is the thermistor on the CH is the problem. ie if this gives a false reading (low temp) then I assume gas would...

I would be grateful if anyone could help me with this - As a bit of background, the boiler has generally been working ok, although if anything the HW temp is lower that it used to be although some folk might put that down to external conditions. The last few weeks I have experienced random...