Rollerball's latest activity

Try a small area with some brasso or similar if it polishes part of the worst mark out then go for a propiatry polishing compound and...

Nope, no cat. I'm wondering if at some time when cleaning the bath some grit got stuck in whatever sponge I was using to do the job...

Thanks. Tempted to get a new bath but only want to go down that route if there's no other option. Does it then sound like my current...

A new bath is not very expensive, but you have the effort of plumbing it in, and, especially, tiling and sealing it. Measure it...

Only just noticed that my plastic bath has a number of parallel scratches on the base - these start around about the mid point and are...

Thanks for all of the helpful suggestions. Think I'll use Wago connectors for the wires but having never used them before which ones...

And remember to drill a 5mm hole in the bottom.

Wiska make a range of different profile inserts for stuffing glands. So you should be able to solve your “rectangular profile” issue...

But put the box over the point where the cable exits the wall, after drilling a 10mm hole in the back. Pack around the cable entry with...

Wiska 308 are the dogs danglies in these situations

Ive found wiska ip rated jb’s to be good for external use.

I need to replace an old halogen floodlight but need to cut the current wire that exits via some brickwork and then connect that to the...