Recent content by rookery34

Any help wood be brill. I have just had my Ideal Classic wall hung boiler,(which is sited in my outside garage)serviced. The plumber pointed out that i needed a Pipe Stat fitting to go with my existing Sunvic TLM2257 frost stat. This is wired with 3 cores and Earth. The system is an S Plan with...

Cheers for that, i feel happier now i know it has been wired with good practice,just need to get a pipe stat and have a go at fitting that thanks again.

Thanks for that,not sure why it is wired like that. I thought i might be able to wire the pipe stat myself.but it obviously isn't as easy now the room stat has been added in to the wiring. Can you suggest anything? Thanks

I have an Ideal Classic RS 260 wall hung balanced flue gas boiler. It has Two, Two Port Diverter Valves and is wired with a Lifestyle Heating Control Pack and LWC1 wiring Centre. I think this is an S Plan System. The boiler is in my garage and also has a Sunvic TLM 2257 frost stat at the...

sorry wires from yhe valves

Turned wall stat down to 0 Programmer ch switched off.Pump is still running.The live from the pump Brown i assume is not wired to the two orange wires from the pump.

Good point dont know anything about electrics but what you are saying is when ch button is pressed off it cuts power to wall stat?

Hello Everyone,This is my first post so any help would be appreciated. I have an Ideal Classic RS 260 wall hung balanced flue gas boiler.It has Two, Two Port Diverter Valves and is wired with a Lifestyle Heating Control Pack. The boiler is in my garage and also has a stat at the side of the...