Recent content by Rowan88

How can I find that out? I have 40w in each just now.... so im assuming 4 x 40w = 160w and the light socket says MAX 250W so im safe?

Worked! :) Thanks so much for the guidance guys.... It is normal for the dimmer to make a humming/buzzing sound yeah?! lol :S

Ok thanks will try now. Bit of a stupid question but I only need to turn of the breaker for the light switches... i dont have to turn off sockets etc... just aslong as the lights go off im good to go?

In photo #2 it is sitting just inside the socket cover with the end snipped off. Is there a difference between L1 and L2? Just because they're in L2 just now but you say L1? Its just sitting in there not connected to anything.

The three icons are L1, L2 and two arrows crossed over in a waving motion. So you are saying I should have one brown wire going into the wavy arrows on the working side of the dimmer and have both blue wires going into L1? Also why L1 if both are using L2 just now, is there a difference?

Hi, In my living room we have a twin dimmer switch (pop in for on/off and turn to dull/brighten). Each dial works two lights for a total of 4 in the room. Two of them on the same dial stopped working today and we tried replacing the bulbs to no effect. This is a picture of how it has...