Recent content by Rxt_ian

I’m not sure how committed to the idea you are, but I recently got my 2019 Greenstar 15 Ri to do hot water priority with different flow temps. It took building and configuring an EMS to wifi bridge you can buy from https://bbqkees-electronics.nl/ Its controlled via home assistant to pick up...

I think the peephole bit must just be backwards compatibility - the built in camera can be viewed on a phone/tablet/pc wihtout going near the door.

https://en-uk.ring.com/products/door-view-cam

I doubt that - why spend extra on a diode, capacitor, resistors, and use an ADC channel to end up with something that’s inaccurate...? The processor in the boiler can accurately time the on and off durations to evaluate the duty cycle.

Why are you so worried about these sockets? There was nothing wrong before you started changing things - now you’ve changed something that had a tiny chance of causing any issue into something definitely dangerous. If you’re going to post asking for advice, then at least follow it and put...

Whatever you do, get those blanks covered! There are exposed live parts inside that huge gap.

Wouldn’t you want it set up as a separate zone? Add another diverter valve, with a thermostat and timer to trigger a pump and the boiler indipendantly for that zone. Saves you heating an empty outbuilding every time the heating is on, or even worse over heating the house trying to warm the...

Does it respond to the button press at all? Does it start fine on the second attempt? I ask because I’ve found JLR cars to have an odd delay on the start button. If there is no message on the displays but it’s registered the button press and not started I suspect you’re going to need it to be...

I have a tado thermostat and hue smart lights. I admit part of the appeal was the novelty factor, but the main reason is convenience. For the lights, they slowly turn on in the bedroom to wake me up, then the rooms I use getting ready for work are lit when I get out the shower. Additionally...