Recent content by Saaj

Hi all Sorry it’s been a while in updating this post. @ebee @EFLImpudence @ericmark @Murdochcat @mikeyd Anyway, had an electrician over and he tested the electric cables that provide power to the UFH matt and he also tested the UFH Matt cable. No issue with the cables that feed power to the...

@EFLImpudence The thermostat comes on when I flick the switch but it’s only for about a second. The RCD trips in about a second or so when I put the switch back to on position

Thanks @Murdochcat I don’t know about the test results for RCD will need to check with the electrician. I will try out what you have suggested but this has been the setup for best part of 10 years with underfloor heating being in place for as long as that but I will try it out. When I took...

@ericmark @Murdochcat @mikeyd Hiya and apologies- have added these pictures and can add more if needed The arrow shows the switch from where the power cable is going to the thermostat and the other picture is the RCD that is tripping. Just to add further to my comments in original post...

I had electric underfloor heating cable and thermostat installed many years ago. It was a loose cable with Heatmiser thermostat. It’s been working fine all these years until September last year when I had issues with it whereby the fuse would trip if I tried to switch-on the the underfloor...