Recent content by SAF

Hi Micky, What I'd be tempted to do it to deliberately set your alarm off to test your external bell. Set the alarm with someone in the house. After the alarm is set, get the person to move around in front of a detector or open a door (not on your entry route) The internal sounder should...

Hi ktepf, Have a look at this. It should explain all you need to know. http://www.ofcom.org.uk/radiocomms/ifi/enforcement/jammers/ S.A.F.

Hi lolly, If you open the cover you will set the tamper alarm off. To be honest, if you open the controls you'll find that many wires, and with respect, you won't know what you're looking for so could cause more trouble. Personally while its working as it should be I'd go for the 'don't...

I agree with plugwash, solder and heatshrink is the best way. You can get heatshrink in short lengths from Maplins. S.A.F.

I agree with the other guys who have answered your posts BF does indicate a battery fault. One question though, if you tuned the power off and everything went dead, did your outside sounder start ringing? If the mains is off and the battery was flat I'd expect the outside bell to ring...

Hi Mike, I agree with Denford1. There are dozens of compatible PIRs out there but unfortunately you've bought one that isn't compatible with your system. Take the PIR back to where you bought it and hopefully they'll have an alternative. Open the box in the shop and have a look at the...

Hi Meadowhog, If you program either zone 7 or 8 as fire alarm on the Accenta G4 you don't need EOL resistors. The circuit is only looking for a normally closed input. Regards S.A.F.