Recent content by safedave

Installed alarm a few weeks ago, after a few teething problems got it all working with no problems. But after approx 4 weeks of it working OK I have a zone that keeps setting the alarm off on the tamper circuit, it's wired as EOL as all the others zones, why is this happening? Could it be dodgy...

Can anyone recommend a decent wireless room stat, ideally I would like to be able to monitor it and make adjustments remotely using my laptop / iphone4?

Thanks for that, I will try in the morning, thinking about it it makes sense what you have said, why would you need a message when the alarm isn't armed.

Just connected 2 smoke alarms and wired them into the premier 24 expander, configured zones and all works ok. I have configured output 1 on speech dialler for fire warning message. Run test on unit and all works well. I have set fire zones onto user test, run test and all works well. Removed...

Go to CCTV Direct I have just purchased a system from them which is top notch, also there technical support is second to none, no waiting, very helpful. I am still in the process of installing my CCTV but to date no serious problems, it will do all the this things you are asking for. I...

Managed to get everything working ok, I have set the channel to 52 on the modulator and get good quality pictures from 3 of our 4 TV's. The main TV in the lounge however will not tune in to the CCTV Chanell. Also the kitchen TV has tuned in and is showing good quality CCTV, however on this TV...

Not sure, all I have done is taken the BNIC Video Output straight into my Maplins Modulator, I can just about get the test signal from the modulator, but very poor quality. When I remove test signal nothing, should I use a BNC to scart connector or just swap the modulator for a better one?

Started my new project installing a CCTV system, setting up the cameras & DVR seems reasonably OK not tried the LAN stuff yet, I am tackling one problem at atime. Now the system is working on a monitor, I now want to try and send the CCTV pictures to all the TV's in the house. What I have...

Thanks for that I tried it again this morning and nothing, must have been the timer. I will change it for testing as suggested. Can you confirm the attributes (I have changed them so many times not sure which settings work) I think they should be User No Inverted No Latched Yes...

Thanks for your help I got there in the end, I had to change the attributes to Inverted & Pulse, I have tried turning the power off a few times and it has worked every time. Do the settings sound OK to you? If I can help you at any time please do not hesitate, email address in profile

Mate obviously you know your stuff, me on the other hand I just like to take on board challenges, I am doing my best, and would welcome constructive advice. I am a fully qualified Health & Safety Safety Advisor, so I could probably loose you in this field, however if I am asked for advice I...

Page 55 Is Program Digi (Don't have one) Page 58 Digi Options (Don't have one) Page 53 (Not sure which bit you are referring to?) Page 59 (Page 59 refers to UDL? don't have one) I am using Premier 24 Installation Manual Issue 2, Are we singing from the same hymn sheet?

Done the manual thing and have configured Panel Output 4 and Comm output 4 to AC Mains Off. Set the attribute to User test. So far so good, I have configured speech dialler input 4 for AC Mains, run test all OK Run User test on Panel comm 4 all works. Now when I turn the power off nothing...

Finally got everything working OK, on a separate note is it possible to programme comms 2 or 4 to send a voice & text message when mains power fails, this happened yesterday, the alarm is fed via a 3 amp RCD which tripped via the main breaker which also tripped ring main feeding fridge...

I want to purchase a CCTV system for home use I intend to install myself, can anyone recommend which one is the best, I am going to fit 4 outside cameras and 2/3 inside. I would like purchase the DVR separately and then add the cameras, for the DVR I am thinking Swann, K Guard, Vanguard but...