Recent content by Sam_G

Thanks, It's this type of thing... with a shower mixer. http://www.diy.com/nav/rooms/bathrooms/bathroom-taps/plumbsure/-specificproducttype-quartz/Plumbsure-Quartz-Bath-Shower-Mixer-11477554 I think i'd have to end up with a four hole type thing to include a shower mixer? And good find...

Hi All, For years i've had problems getting the bath taps to seal. The basic issue is that the holes appear to have been drilled a good bit wider than they should have been. I measure the gap between the holes to be about 7 1/2" and the holes are about 1.5" Diameter. Don't know whether this...

Rocks1 Cheers! Easy when you know how eh... And in a moment of unusually good luck i've taken it off and put it back on again and it seems to have solved the problem. Or at least drastically improved it. Haven't checked it for maintaining temperature yet so we'll see. I still think...

Hello all, I'm hoping someone could shed some light on an oven door hinge problem... i've searched through but can't find a specific answer so sorry if it's been covered before... We have a diplomat ADP3640 oven. Hinges are clearly gone. Oven sits about an inch proud when closed. Mrs now...

Cheers for all the advice guys. It sounds like a bit of proper work is required rather than a further bodge! gcol, this is probably the best idea but not sure i have the technical skills at present! The other thing is, you can't see it from the pictures above but the bath is not set against...

Hi there peeps, i'm a complete diy amateur looking for a little bit of assistance. Done some hunting around on here but need a bit of specific advice... Just moved into our new house and found the bathroom is rather less than watertight after finding water leaking out of the kitchen door...