Recent content by sbdnot

  1. S

    Neighbours boiler flue 10cm from our garden

    Our neighbours have installed the flue for their combi about 10cm from the edge of our garden, so whenever it runs you can smell it in our (small) garden. I thought you had to be more than 60cm from the boundary? Or does height also mean you are OK - it's 240cm from ground. The property is being...
  2. S

    fitting banisters to half cut string, half base rail..

    yeah - did think about just replacing the treads, but as they are originals and decent condition that seemed like a lot more work than I need. Think I will probably try and make a rounded piece to nail into the side of the treads and then attach spindles as you would for a traditional cut...
  3. S

    fitting banisters to half cut string, half base rail..

    Replacing bannisters on our stairs - previously there were horrid metal ones screwed into the stairs. The problem is the stairs are cut string - no base rail, but have a board that has been added along the side where I'd expect the treads to continue with a mitre. Means that as far as...
  4. Untitled

    Untitled

  5. Untitled

    Untitled

  6. pics

    pics

  7. S

    sink waste too low for appliance hose

    Seen those, and yeah, didn't Luke look either! Amazed can't just get a longer right angle. Guess cutter has to be better than hole in wall though, unless anyone else has any bright ideas? Thanks foe the advice, much appreciated
  8. S

    sink waste too low for appliance hose

    About 7cm of pipe from wall. To move down means knocking hole in side of house, so rather avoid that if can!
  9. S

    sink waste too low for appliance hose

    Hi I am adding in a dishawsher and just trying to plumb the waste hose into the adjacent sink waste I got a sink + washing machine trap (like this: http://www.screwfix.com/prods/12794/Plumbing/Wastes-and-Traps/Sink-Washing-Machine-Trap-40mm) and all seemed straight forward BUT the soil pipe is...
Back
Top