Re-reading my description of current hot water heating it might look as if it is cycling - its not
The heating comes on strong(you can hear a nice roar) until it gets to 85/6 then you can here the heating back off a little but still on until temp drops to 81ish then comes on strong again - it...
All changes made - seems great so far! Ran the hot water tap for 10 mins to give a decent drain to cylinder.
Boiler kicked in and steadily increased temperature up to 86 wit hot water symbol flashing then slowed down - temp dropped to 81 - then kicked in a bit more up to 86
This repeated...
there are no valves in the airing cupboard connected to the cylinders. I can only assume there is a single one near the boiler - but will check tomorrow.
Will go try those - but quick feedback
1 - I had a bill for a VR65 so I am sure it is in there some where
2 - The 2 cylinders are pretty dumb they are right next to each other in the airing cupboard and there is a single pipe feeding them (it splits) and a single flow back out (with a 2...
Thanks so much for the feedback guys - I am going to have to take out the back of a cupboard and move a tumble drier and washing machine to get to the circulation pump!!
I am working form home tomorrow - so will have to do it then, think the MRs would kill me if I started taking apart the...
Hi All,
Have thoroughly searched the forums but can't seem to find the answer for this but it has helped me check things.
Our House is a fairly large 3,300 square foot detached house. I had fitted about 7 years ago a new Vaillant 438 boiler to replace 2 really old crumby ones (one did...