Recent content by scott25

I have nothing to hide I been on other forum when I was asking about my brothers gym so am asking questions about my workshop am sorry about asking questions and advise that's the problem with forums people are to quick judge I will post pics off my brothers gym from start to finish I have...

i would be doing much welding I would be useing my compresser more but more then likely I would be useing the normal tools. I just want to make sure I do it once and it's right if u understand Is the wylex insulated box with the rcd 5way a good cu for my shed I think I would have to get most...

So it's not a good idea to have for the compresser and welder to have there own circutis The compresser has a 13amp plug also

Compresser is 2.5 hp 1.5kw 230v @ 50Hz

Same as my welder I will get the details of the compresser

3. Despite #2, I suspect that the OP fully intends to do all of this himself and that there is no electrician involved, or if there was, the £750 quote has ended his involvement There is s sparky doing the work I could did it myself but am not part p so am doing all the leg work

I would like to do most off the work run the cables dig trench etc then sparky can check all the above work test and then connect it all up like I did for my brothers gym I would also like to buy the bits I nee my self as I work for MK I get a gd discount So the wylex with the rcd and...

I have a blagdon power safe which is plugs into a socket in my front room with a rcd it wot u have for ponds it takes glass fuses the welder don't trip the rcd or anything The sparky said he would run from the house cu as the load is not a lot as I would not be useing the welder and...

Kk no worrys

Am lost on my own thread

I had me kitchen rewired and its run in conduit from the cu to the kitchen the same route I would like to run my t/e for shed has it been done wrong my kitchen Gasless mig Am talk typing thou my iPhone 16amp for the welder

And he will not let me surply anything but the thing is I work for Honeywell MK electric so I can get a discount also That's way am asking for your help on this forum cause £750 sounds a lot to me

6mm Twin and earth will being conjure from the cu in the hallway under the stairs then thou to kitchen behide the units still in conjure thou as it already there Ban all sheds how would u have the power to the shed Wot amp mcb would be for the welder as it runs off 13amp plug

Hi he quoted me £750 for doing the job which is all in 55ft I have a rcd in the house cu this is wot he said 30amp in the house cu 6mm 3 core SWA 20meters 5 way cu in shed 6amp for lights 16amp for sockets 6amp for compresser 6amp for welder Spare for outside lights Am...