Recent content by seb963

No they did not measure the pressure. I assume I can do this by myself using a water pressure gauge? Static would be with no taps open, and dynamic with at least one tap opened? what is a "standard" reading for static and dynamic pressure? The current flow at the garden tap is about 20L/min

The 25mm MDPE runs for about 5 metres and is connected to 22mm internal pipework after the internal stop cock. So, from fezster comments, I take it the 32mm MDPE would not have made a huge difference?

Hi, I have just had Thames Water upgrade my mains connection to a 32mm MDPE, however my plumber has run a 25mm MDPE after TW stopcock from the property boundary into the house, hence I am wondering if this would have already reduced the pressure I would have had into the house. I would have...

Hi I need to repair a pretty large hole in the old plaster (see picture). I have removed all loose plaster down to the masonry and need some advice on what type of plaster to use to fill the hole. The hole is about 1m by 40cm by 1.5cm deep. I am new to plastering. Should I apply a browning...

Hi all, I am in the process of redecorating a bedroom and need some advice on how to paint on old paster walls. I have stripped out the old wallpaper and am now left with the bare plaster walls, see images below (likely from the 1930's when the house was built). The walls are in good condition...