Recent content by sebastianbawn

My electrician believes its a wall tie .house is 1960s Sb

Hi all. What is the reason for having a single wire of "lead looking material"? Buried into the wall near a metal back box?

Ah Ok, ill get a 3 switch.thank you

Just out of interest would the double switch socket actually spur from the switch? In other words will I need to purchase a 3 grid or 4 grid? I had visions that it would connect to a switch like the unswitched sockets meaning I need to purchase a 4 grid Sb

Great I will be getting a 3/4 grid so should be fine.thank you

Just looking at back boxes for a grid switch, will a standard 47mm metal back box suffice or does it have to be a grid back box?

I can't see what difference a 20a grid switch to unswitched socket, and a fused connector unit to flex outlet has? Sorry not trying to question people on here but just trying to understand it

The grid switch to an unswitched socket and 13amp plug is the same as having a fused connection unit, I thino I interpreted that correctly, which is acceptable

The current won't actually be going through the 20a switches though. A single grid switch is the same as adding a socket.a socket is classed as a 13a p socket but is still wired into a 32 a RF

Aah a terminal block makes sense.thank you at least I know what to purchase now.really appreciate all of your help Regards Seb

What do you mean by larger terminals as all back boxes I've seen appear similar? Please could you elaborate so I can get the parts in.thank you Sb

Seems trying to cram 6 earth's into a single back box terminal is a bit optimistic lol

Thankyou once again! Yes each appliance will have a single socket, and a double switched socket as a spur. Most the info I read about no double sockets was on the iet forum. Thanks I will purchase a 47mm back box. My understanding is that the ring main will enter switch one, then connect to...

Sorry to ask again but I have read alot online so some clarification would be great! The grid switch would not be central on the ring circuit as the circuit runs up and downstairs, would this impact in the case of overloading? Also many people are saying not to use double sockets only single...

Yes we would like the isolation switches:)