Recent content by sellyservice

Hi yes can check, do you mean the grey wire at the Valve above the bolier and should it be 240v live..can check no problem..thanks for taking time to help

Hi last night , took the lid off the valve cover and moved the valve into the middle postion and all night we had hot water and red hot heating..first time ever..

Hi you can turn off the HW on the programer and the CH stays on(on the programmer)..thanks

Hi Turned the cyclinder stat to 55, when i got home tonight CH had come on but main rads were just luke warm and bathroom rads were baking hot, when you turn the HW water off on the programer and leave the CH on ,the boiler cuts out , it seems you can only get CH when the HW is switched on..Thanks

HI thanks will drop the cyclinder stat to 55 and see how it goes, thanks for taking time to help..regards

Hi sorry about delay, did what you said and the boiler fired after a 10-20 sec delay, but the leaver on the valve did not move , it stayed at the bottom torwards (auto)..thks

Hi mat I have had to pop out to pic kids up will try when I get bac and post reply. Thanks

Hi did what you asked and boiler does not fire at all..thks

Will do, take a min need to go in loft..

Hi Mat yes hot water is quite hot and bathroom rads hottest in the whole house(when the rest work)

Yes thats the valve but on its side..thks

Hi the whole thing looks new, This boiler like I say is only 2 -3 years old it replaced one of the same make that gave up, the 2 bathroom rads have always got hot with HW, I,ve looked at the valve above boiler, it has a small slide lever on the side that has manual on the bottom and then auto on...

Hi Thanks for reply, can i ask what you would have a guess at, like I say he has changed a valve that has one pipe going into it from the boiler and then two pipes out into the house and sits on top of the rafters above the boiler , i,m sure he said that controls that ch and water switch over

Hi Guys, we have a Baxi solo 360 pf, that has been a load of rubbish from day one , it's 2-3 years old, the gasman has changed PCB, Pump, the valve on the pipes above it, timer and room stat, but still just shuts the central heating off for no reason, hot water seems fine, the rads that run off...

Thanks for the kind reply and help, you have given me new hope in the boiler repair trade...