Recent content by Serenity

Hi Raden, I've received the email and the attachment is open. Thats great, thank you.

Yes, I think so. I upgraded with them 3 months ago so that it could handle larger attachments. If I have a problem, I'll drop you a line.

Great, Its a Glow - worm Micron 60 wall hung boiler. Thank you

I'll bleed the rads tomorrow when they cool down. As for getting up to the loft (gulp) I can give it a try. At present the boiler is cutting out alot and coming on again for shorter periods now.

It is a little boiler, the smallest I've seen. Its purring nicely, no noises or bubbles. The boiler has been cutting out after longer periods of being on, which is a result, but coming back on after a couple of minutes for long periods of about 15mins. Unfortunately, the vendors did not...

Spoke too soon, the boilers cutting out but at least all the rads got warm, just wanted it to keep going for some HW. I'll keep resetting it in hope to get it going again. Biazarre.

The gasman left Sat at 3pm and nothing was still working when I left the house at 7.30pm. At 2am I checked and still no HW or CH, so I turned everything off e.g. boiler CH & HW swiches. I was reading through the postings on this site this afternoon and decided to try out a tip. I put my...

Hi Gasguru, Yes the immersion heater was on for several hours, but stone cold whereas in the past the pipes coming out of it are usually very hot. What can be done about the blocked feeder pipe?

Hi Chris Its a Gloworm Micron. There is an immersion heater, which is new to me, not previously had one. The original prob was the rads would not come on and the burner kept cutting out after 2 mins coming on. It was said there was no water in some of the rads. Yesterday, before the...

I am sorry for the mistake and to the person's posting who I hi jacked. I don't usually sign up and write postings. I am sure I will become familiar after today. :oops:

Just to clarify, these were two different visits 1) up to 3hrs and the 2) up to nearly 5 hrs. Visit one - replaced valves etc. Visit 2) gas leak, etc. I live in London

Hi Tony, I was looking for information on the net today regarding the airlock referred to and came across this site. I signed up, then suspected I was on someone's posting. I don't usually sign up to sites, but under the circumstances.......... I paid for two valves, a timer and hours...

Hi Tony, I used a Corgi person previously recommended and have used before who are currently on another big job. As the CH broke down six weeks ago I was prepared to wait the three weeks for him to look at the problem. There was no problem HW which was working fine throughout all this...

Thats worrying. I also have a glowworm boiler. After six weeks without central heating and just over a week without hot water I am at my wits end. The boiler checked out fine. However, the valves were changed because it was found the hot water was operating 24 x 7 and not turning off...