Recent content by Sester70

Perfect, thanks

So if it's drawing 45amps on a 6mm cable and 32amp breaker that's fine?

So some advice please. Just putting in new kitchen. Looking at wiring for hob and cooker. I have had new consumer unit fitted and 6mm to 32amp breaker for cooker. I'm looking at getting an induction hob so that will be around 7k and a single oven so that will be around 3k. So do I put it all off...

Just checked upstairs as hot water was on, I have one flowing left to right and two flowing right to left. Can't get to third to turn on and check.

Yes, I watched it move to all 3 positions before I plumbed it in, but had wired the motor in. I did this as a test before I even removed the old valve. Plus pipe that's rad side coming off valve just doesn't get hot, but rads a very hot! Just had all new carpet put down, don't want to have all...

Great idea, thanks

I have not tried that yet. But will give it a go. Thanks for you help on this. I'm sure it seems worse since I changed valve.

That was my worry but seems to be worse now

Yes there must be but how would that happen? Motor and valve all brand new.

I have a gravity central heating system. Just moved in to house. Rafa were on when hot water came on. So I replaced the Honey Well power valve as I tried just the motor and still had the issue. Old 3 valve looked very worn. I tried to refill the system from header tank but it would not...