I have a upvc window that won’t latch and close. The handle moves freely but the mechanism doesn’t move. The mechanism won’t move by hand either.
The window is on the first floor so any help would be appreciated and even better if I can do it from the inside
Thanks in advance
Turned a very hot radiator off and now the pipe feeding the cold rad is too hot to hold but actual rad is barely warm.
Set all the other lock shields to a quarter turn and see if this works.
Thanks for the help
Thanks will try this, however whoever installed the rad put 2 blank valves on the radiator rather than 1 bleed valve which is making it hard to bleed without making a mess haha
Yeah I went through and closed all the lockshield valves and then opened in quarter turns from nearest to furthest (nearest 1 quarter open, 2nd nearest 2 quarter ect.). The one not getting hot is the furthest away so I left that fully open
Would you suggest a different way?
Will give it a try with all the lockshields at a quarter turn thanks. Slightly changed my post as it was barely getting warm with all the other radiators
I have 1 cold radiator that is furthest away from the combi boiler. I have balanced the radiator so that the lockshield valve is all the way open, however no hot water coming through the TRV.
When all the other radiators are off it barely gets warm. I thought it might have been an airlock so...