Bob on.
Removing and dismantling this
Showed me the white spring retaining piece had sheared :(
Tried eBay and a few other online stores, cannot find a single source :(
Thanks for all the replies. Looks like I got a few things to look at, starting with the clipped-in thing with a fallen-apart diaphragm :(
I didn't order that part but very nearly did; this forum just saved me £21! My doco says I have an "80" but as you say, the internals say its an "SE". Brilliant.
Thanks for the quick reply, but my question remains... where is this switch? I cannot locate it.
As for cleaning it out (if I find it) if the eBay part I pictured is anything to go by, it doesn't look like it comes apart.
Morning.
Quick explanation of why I'm looking for this elusive little gadget:
DHW only fires when the hot water tap is turned to delivery quickly, but under those conditions the water passes too quickly through the exchanger to get much heat in it. Any slower and the boiler shuts off the...
Hi Tony,
If this were a Nokia support forum I would ask if you had the latest Nokia PC Suite installed. If you had then replied "yes" then I would recommend removing the Nokia-specific BT drivers and find either the Widcomm or Blue Soleil drivers, which work perfectly with the troublesome...
Hi Tony.
The full pcb pic was taken with a Kodak Z740. The 9-pin close-up was with my Samsung D900 cameraphone 8)
To get the pics on my PC I used bluetooth from the Samsung and a card reader from the Kodak.
I posted the images to your forum using my photobucket account, which is free...
I decided to go ahead and fit this new board.
This new board is now fitted and working perfectly, including the new light-show from the LEDs :lol:
Ok, for future reference, it is ok to fit a new-style 9-pin connector block to the existing 8 pin block. Pin 9 (which remains exposed) can be...
I've emailed techhelpdesk at Ariston, who I believe now own the Chaffoteaux brand.
In the meantime, I've scanned the schematic that came with my original boiler.
Has anyone got an equivalent schematic for their post-2002 Britony Combi SE80 pcb? Could it be affixed to the outside of your...
Hello all. Steve here, desperately needing info if anyone has it please?
I have a new PCB for my SE80 but the fan/pressure switch/thermostat connector block has 1 pin more than that which it is replacing.
Background:
4 weeks ago I got the dreaded lockout flashing code 60 (ionisation pcb...