Recent content by shane1

Does anyone have this on pdf form as i need to go look at one on thursday but cant find a download for one anywhere??

If its kettling then sounds like the heat exchanger is well and truly scaled up

Another thing, i know its a silly question BUT i have been out to these type of problems before and the customer has "no gas"

Its electronic ignition so there needs to be a demand for it to light, have u tried running a hot tap? Is the mechanical timer (if there is one on it) working properly when you switch heating on, are you getting anything at all when you click to on position as that could be faulty, they are...

could be the HT lead or harness

Called Baxi technical when i was on site, done some resistance checks etc, turns out its the thermistor and harness from pcb, so part ordered and lets see if the are right

Cheers slug, ill let you know how i get on with it tomorrow :)

Right ok thanks, it does seem a right nightmare of a thing to be honest, im ok when its the standard multifunction valve but these electronic BBU's ive not come across, ill do my best to sort, i was thinking of lighting manually but its just my luck ill walk away and it will go again! :cry...

Cheers :) Im fully gas safe registered but BBU's are new to me really on the changeover front :D

Ok cheers lads, im sort of getting it, i will be putting a Worcester 28i or 30si in as the customer likes his worcester's apparently, so i will be pricing one of them, ill see the flow rate difference and see if there is any en suites etc and go from there, i went out tonight to look at BBU as...

The cylinder is literally right next to it above in a cupbard, the new boiler position will be in the kitchen with a horizintal flue and the gas will come directly in from there so shouldnt be a problem. The blow off will be fine and there is a grid outside for the condensate to drain away, as...

There is a BAXI Bermuda 51/5 in place at the minute, and its in a bungalow, so just wanted to know how easy we are talking?

Ive never done this, anyone give me any tips on making my life easier on the change over, ive only usually done combi to combi etc, so any help would be much appreciated, i haven't priced the job yet as i wanted to know how easy / hard it is first and what is involved step by step, if anyone has...