:D fault may still b power supply related but looking at yr video thats been uploaded its probably backlight failure- there is a circuit which is part of the invertor which monitors the current drawn to do with the backlights and any failure here will cause problems i am aware of a mod which can...
:D well theresa thing have the full servicemanual to upload but cant upload it here.....the smps does need to be checked.....especially the standby 5v supply and the 12volt switched supply-dependant on the supply fitted the reservoir capacitors are only rated at 10v for the 12v supply-i always...
:D that may be true ,from a servicing and reliability veiwpoint these sets are now built to a price-and it seems that its (to the customer)cheaper to throw away and just buy new....as long as you have the money to do so....
the fault is easily repairable and may be down to 2 things-first is smps failure and the second is due to software...there is a service mode available but unless you know exactly what you are doing you can scrap yr set-also depending on model you need compaire to put the set in servicemode and...
:D firstly the comparison picture wise between a crt tv-regardless of make or model or age-is by far much better than any lcd tv you canbuy at present-a crt will provide excellent sharp well contrasted pictures-an lcd cant do this-there is another issue as well with both lcds and plasmas which...
:D first things to check is the ht supply....with the line op stage disconnected,load the ht supply with a 40w lamp and switch on-if you have correct ht and all other supplies are present the line stage needs checking.
problem may be faulty lopt-the set will be giving a couple of secs line...