Recent content by simmychick

Thanks for that infor. I didn't know there was no requirement so will do it the way I said in my second post

I could well be over complicating it or not describing it right. I've a 400mm length of worktop between a tall oven housing to the right and the induction hob to the left. I can bring a 6mm cable down the middle of this gap. I'd like 2 separate isolation switches. one for the hob and one for the...

Would it be possible to run a 6mm cooker cable vertically from the ceiling through a 45mm back box into a duel cooker connector fixed to the back of a kitchen base unit. From the duel connector, run one 6mm cable back up to the back box, to a 2 gang cooker switch and 13a switched socket. This...

Can I ask for a clarification on this. Does turning OFF the interference detection also permanently turn OFF the tamper detection on the whole alarm system (siren box and individual sensors)?

Wow that was quick. The batteries have all been checked and any that were low have been replaced. The lids are all tight and screwed firmly to the wall. Just for info though, would a tamper fault on one of the senors not be causing more siren alarms than say, once a day at random times? It...

We have installed a HSA6200 wireless alarm kit. This alarm has worked perfectly since purchased and fitted in August 2017 (The product has a 2 year guarantee according to the manual). The problem started several weeks ago with the siren sounding (falsely) approximately 1 hour after arming...