Hi many thanks for your help i did as suggested heating ok no hotwater with link on receiver l to l1 i then attatched the grey wire to l1 on receiver and to hot water on boiler and seems to be working am i right with this thanks again
many thanks so using the single channel hive i leave the loop in place between live and hot water remove live central heating sorry but a bit lost so live neutral n and earth is pretty straight forward i then need 3 and 4 on hive to ch and hw on boiler am i correct with this
sorry im aware you have to remove ribbon but there are two loops on the boiler between live and hot water and live and central heating as per pic do i remove these loops before fitting hive many thanks