Yep I'm going to get someone to look at it. When the hot water only is on on hive when turning off on the button in kettle the boiler by cutting the water supply to it by not turning off the boiler. It's wiring those fools who looked at it have mucked it up.
Did a test on it this evening. Set hive to turn on HW set cylinder stat to 50c it carried on heating the hot water until I nudged it down a bit. Then the HW valve actuated shut the water off but it did not tell the boiler to shut down hence the boiler started kettling and I turned it off on the...
I set hive to just turn on the HW yesterday and set the cylinder stat to 60c it didn't shut down the boiler and the water was red hot so I had to shut it down.
It only does it if the boiler locks out and I have to reset it. The wiring centre us an late 80s birds nest of wires. I might have to isolate the main supply take the cover off and actually trace how that guy has wired in the HW head and the cylinder thermostat wiring along with the wiring to...
Thanks mate. Yep into the cylinder it's a 2 port valve on the pipework on the way into the cylinder. I know hive has hw on and off on the control unit being 2 zones. The boiler has sometimes sounded like no water flow so I'm thinking the 2 port valve is sticking hence no water flow on fire up...
Yep it did on the original timer. Hive was installed it also worked fine. I started having boiler lock outs on the baxi then during covid I called a local heating firm. To be honest they weren't much good they sent a bloke he cut one of the wires to the HW 2 port valve of the tank side then they...
Hi my hive system is not shutting down the hot water correctly. I have changed the cylinder thermostat and at 0 on the tank thermostat when turned and call for hot water is on hive, as you turn it it does cone on to heat and if turned down to 0 turns off as well. If it's set to say 60 with just...