Recent content by SJP17

Got the baffles ordered today £60 for the three including delivery Cheers Stuart

A local builder said it was a complete waste of time , so is he right ?

Thanks for your help John , is the fuel pressure only adjusted by the screw above where you would fit a pressure gauge ? Im just waiting to hear back regarding a price for the new baffles then ill be arranging a engineer to do the gas test and a check over, but in the mean time i might...

Whats your problem with me ?

Yes i understand the adjustments are needed and im planning to get a good heating engineer to check oil pressure and do a gas test , ive not adjusted anything myself all ive done is a clean out and replaced a nozzle, im just doing a bit of research to find out more about the boiler , in time i...

Hi , ive just been doing a bit of research and after checking some pictures online ive noticed that my rogue heating engineer has altered the fuel air mixture , i was watching him at the time and he said he was bleeding air from the fuel line , but at the time i noticed he wasnt using the normal...

Where would the seals be , top of the heat exchanger and also where the burner is located ? How could i check the air settings ? Thanks for your help much appreciated

Any suggestions ? :roll:

Oil/air pressure is something i need to check , the last guy that looked at it said the settings were fine but he was a bit of a rogue so i have my doubts whether he ever actually checked it , the guy at the local plumbing shop said over time the baffles will get a bit warped but settings...

Thanks for replying could you explain a bit more what would cause this Cheers Stuart

Any ideas folks ? :roll:

The floors in my house are all laminate , there quite cold , i was wondering if the foil backed underlay made any difference , there is 3mm sonic gold on e-bay says it is 0.6tog ? i take it thats an thermal rating , how does it compare with the bog standard el cheapo white underlay , worth it or...

Hi , after noticing that my boiler was making a louder than usual droning noise while running , i first replaced the nozzle - no difference , then i decided to remove the top from the heat exchanger and cleaned the inside , there was loads of soot build up which i cleaned and hoovered, after...