Recent content by sloaney

You're not going to get a new hose and install for £75.00, I charge more than that and I'm up north. Curry's have a basic install charge of £90.00 for a standard cooker install.

How much did you pay him?

The rollbar bush is clamped with the same bolts as the wishbone, so had the opportunity to have a good look at the bush, which seemed to be OK. But I suppose what looks OK and what is OK are two differrent things!

Having problems with a rattle/knocking front nearside when you go over rough road (broken tarmac/run up to zebras etc) big bumps etc not noticeable. Steering and handling not affected. Passengers swear it is coming from the passenger footwell area. Upto now have changed droplink and bottom...

Is the return isolation valve on the boiler closed?

A long shot, but is there anything being stored in the boiler cupboard that could block the signal to the reciever?

Based on the information given that calculation is correct, but taking into consideration the words "about" and "I think" that is where the additional pressure loss will be.

If you put a straight 6 metres in of 28mm the total drop acrosss the pipework would be 0.9mb (based on 3.9m³/hr and a total equivilant length of 15metres) Tin hat on :)

The PRV should only let water pass if the pressure on the gauge on the boiler exceeds 3bar. If you top the boiler up when it's cold to about 1/1.5bar then run the central heating on max. If the pressure on the gauge reaches 3 bar quickly (say 15 minutes or so) you have a problem with expansion...

re post If the cooker is the electric one you referred to in a recent post, and the gas fitter has in fact fitted a hob above it, you have probably got what you paid for :lol:

I wish there was a check-a-customer website, along with a rogue customers and cowboy customer T.V. programmes. You for one wouldn't be getting any work done. :x

I added 10 extra vowels to my e-mail addy and sent my self an e-mail. According to the system all went well :?

Hi, Running Windows 7 (64). On windows live mail if I mistype the email address the e-mail still gets sent and then a copy appears in the sent items folder. I never get a "failed to send" notification so am none the wiser. Is there some settings I can alter to bring this problem to...

OK to leave them in, so long as they're not leaking. Don't forget a new PRV.

I'm a registered gas engineer, got called out to the above because of no C/H. The DHW side of things is fine. The system is pressurised to just over 1 bar. When trying to start in C/H mode the pump runs for about a minute then stops, the fan doesn't come on. There is no fault code displayed...