Recent content by southsaxon

Thanks zipper. I really appreciate your help and guidance.

Thank you zipper. I've decided to clean the gunge out the matrix as well as replace the flowmeter. I've searched for "matrix" and/or "transfer hose" as you suggested but can’t find anything that tells me how to remove the matrix for cleaning on my model SGS43T52. I’ve undone the hose from...

Thanks zipper. I guess the float’s ok then, it may have been a little sticky or just got overwhelmed. Ok, I have the l/h side panel off and have located the flowmeter. Should be able to replace that ok. Just a couple of final (hopefully) questions: There looks like a build up of...

zipper, before taking the l/h side off I tested the float. It works but only when there is more than an inch (25mm) in the base. So when I chuck a load of water in the float lifts, the pump kicks in and the water drops to about an inch and then it stops. So there is always appx an inch of...

Thanks zipper. I'll take the side of now and see what I find.

zipper thanks for all of this info.. So there is no way of checking the flowmeter (0515), just a case of replacing it just in case it’s faulty? Sorry to be a bit slow, but are you saying that when checking the safety switch, by manually lifting the float, it will activate the pump even...

Thanks for your input zipper. When I click on your link to the flow meter I get the impeller jug part? Can you give me the correct part number for the flow meter so I can do a search for it and look for it on the exploded parts diagram for SGS43T52 that I’ve downloaded. I was...

Ok John D, thanks any way.

Thanks John D So is the entrance to the tube you mention, something to do with the circular vent thingy (about an inch diameter)about 10 inches up the left hand (as you look at it) side wall appx in the middle? Or is it under the small mushroom thingy in the middle of the floor...

Thanks John D Sorry, I should have said in my original post, the door was firmly closed, the machine won't turn on if not, and no one was fiddling with it No sign of excessive suds. I’d already checked the exploded parts list diagram and the only things that appear to be in the door...

Bosch dishwasher SGS43T52GB This machine is 6 years old and has always worked perfectly. My Wife is meticulous in keeping it clean, cleaning the filter regularly etc.. The machine has never been moved from its original location and has always been totally reliable. However, out of...