Recent content by sp

you got 2 channel programmer which control hot water and heating. no 4 on programmer send current to thermostat and than thermostat send it to motorised valve. thermostat most likely getting 240v when heating is turned on from programmer, if you want to make sure it , just replace programmer on...

Gadget Goblin, Don't touch the timer wiring ,just keep it on constant or if you have connector block as shown in picture , disconnect timer wiring and connect black wires in same block, brown and blue separately ( check picture 1) For single channel Hive boiler live to hive live boiler N to...

hello everyone go on below link , in a post there is a Rapidshare link you can download from there, i already tried today and it's working link //www.diynot.com/forums/viewtopic.php?p=894040#894040

if you want to put built in timer in, wiring as follow brown to no. 1 blue to no. 2 black to no. 3and no. 4

thanks for the advice, will use one 6a mcb.

hi, I am wiring a house with two bathrooms do i have to wire two bathrooms with two separate 6a mcb or bringing two feeds from bathrooms to junction box, than one 6a mcb ? which is the best practice according to new 17th edition ?

interpart link for manuals http://www.interpartspares.co.uk/documents/index.php http://www.partsarena.com/baxi/System/index.htm

or you may have low pressure taps is your taps water flow like a garden tap or spray type ? if it is spray type, it may have restrictor at water out point just undo nut at water outlet points, remove restrictor and refit the nut this might solve your problem

yes, you can use water pressure gauge to check the water pressure look this http://www.bes.ltd.uk/nav_graf/frames_cat.htm

vaillant turbomax 242e manual i am looking for vaillant turbomax 242e installation manual in pdf format to download. i have search on google and vaillant web site for download but not found yet( vaillant web site shows turbomax plus and turbomax pro in combi section, not turbomax ) if...

thanks for the reply, it could be a mod valve.

4 years

boiler is baxi 80e and hot water temperature sensor

hi, i have a problem with one baxi boiler, it's hot water sensor goes every 2-3 months . scales build up on sensor and boiler won't fire up on hot water demand any perticular reason for this or long lasting solution for this problem seeking advice from experts

corgi man will ask about your experiance ( who with you get gas on site experiance) and about your qualification he will ask for safety tools you got ( smoke matches, menometer etc ) he will ask you, how to do tightness test and simple gas rate calculating questions and flue and ventilation...