Recent content by srb62

Would a screw from the plastic connector do?

Thanks. I'd assumed it was some sort of plastic but looking more closely, it could well be made of steel. I don't have a multimeter but can probably borrow one.

Thanks, it's not so much that I need an earth wire (as it's just an old type of rose/fitting) it's more why there is a bare wire.

Hi, I've taken off a ceiling rose. At first I could only see a single live and single neutral wire and assumed because of the age of the house there was no earth wire. However, I noticed what looks like a very short, bare, third wire between the other two. Is this likely to be an earth wire that...

I have ordered Pro-cove Lite polymer coving. It is 82 mm x 82 mm. When I look for a mitre box or tool for coving they seem to be for other sizes. Would I be able to use a mitre box or tool for, say, 127 mm coving to cut something smaller or does it need to be for the exact size? Thanks, S

This is happening even after the heating system has been on for a while. I'm not entirely clear if you are saying uneven temperature distribution is normal or not? I was under the impression it wasn't normal, but I'm happy to be corrected. Thanks

I thought all parts of a radiator should be the same temperature.

Sorry, I think I've given you the wrong impression. I'm not actually the plumber just the guy who'd hired the plumber. Thanks for your help and apologies again.

Two hours

How do you mean? For what reason?

I forgot to say that we tried this - it did make the radiator hotter but the top was still noticeably hotter than the bottom.

Hi, We paid a plumber to do the work. It hasn't been rebalanced.

Hi, I have just had the old radiator removed and a replacement installed in a new position in the living room. New radiator is not fully hot - the section near the bottom is not as hot as the rest. The new radiator is a type 22 with a BTU of 6800. The old radiator was type 21 with BTU of about...

A friend sent me these photos last week of the dry verge system in a new roof installation. Does it look OK?

Hi, I've come across this white mouldy-looking substance in the loft of a friend . Anyone know what it might be and whether it's something to worry about?