Recent content by Stacy1911

Got British in and they drained system and checked installation. Everything was fine, but today no hot water to the shower. Water is coming out but is cold. The boiler does nor recognise that I am demanding hot water. Pressure seems fine. Hot water fine in basin and bath.

Cannot remove as it is too tight, but think I should get it checked. Thanks anyway.

Also the filling loop is still on. I the pressure has reduced since I have bled the radiator so will try removing the loop to see if the helps bring it down further.

Also the filling loop is still on. I had the boiler installed in February and have just moved in. The valve controlled is pointing downwards in the direction of the arrow on the valve. Is this as it should be?

It does fluctuate when the boiler is on and when I use the hot water or switch on the heating.

Hi I have bled the radiator and it is now reading between 3.5 and 3.7 bar. It was as high as 4.7 beforehand and the bar arrow had gone waaaay beyond the red zone. It is still slightly in the red zone.

Have a valliant ecotecpro 28 boiler. The pressure bar is on high - what should I do?