You are a complete star. :wink:
I tried the mixer shower and thought you might be right because although i was only getting luke warm water out of it, the hot pipe into the shower was plenty hot. So i left the shower running and turned on the hot tap in the sink. The hot pipe to the shower...
Wooooahhhh! I never expected that many replies. Thanks everyone for your help.
I also thought the 18 degrees for the cold water feed sounded high so i wondered whether the temperature sensor is naff.
There was one thing i forgot to mention, that according to the temperature meter, i was...
Right then. I have checked the temperatures while i was drawing DHW at about 6 litres a minute, and they are as follows:
(NB. SHE is secondary heat echanger, not my wife)
Output from primary heat exchanger (i.e. before going into SHE): 60 deg
Input to primary heat exchanger (i.e. after...
Firstly, you're not really in Cuba are you (or how would you know about our cold weather? BBC world service?)
I had thought about the colder mains water and yes, i think that may well be a part of it. I will be borrowing my brother's temperature probe tomorrow so i will post the relevant...
I have the manual for this boiler. I have followed the flow chart, but my problem doesn't lie clearly within any of the faults in the flow chart.
I have thought it through methodically. There is nothing wrong with the primary heating circuit as the CH works fine. There is nothing wrong...
I have a Chaffoteaux et Maury Britony Combi 80 and the CH part works fine. Over the years the DHW has got cooler and cooler (i have noticed this because i have had to gradually turn the thermostatic mixer shower up to near maximum over time.) I imagine this has something to do with the...