also how did you do the calc for the amount of concrete needed?
i thought it would have been 8.6*4.3*0.1=3.7
is there a percentage or value that needs to be applied to the calc that i dont know about?
thanks again
thanks for the help. sounds like i have more work than i wanted. may have to byte the bullet and do it in one hit then.
i am not sure if i have mislead you or if it makes any difference but the workshop will be more of a large shed for hobby work and storage. there will be nothing like...
hi all,
i would like some advice on creating a sub-base for a concrete slab for a workshop i would like to build at the bottom of my garden.
the area where the slab is going is overrun with grass and weeds at the moment. i was wondering if it would be acceptable to strim all the grass and...
thanks for the post. i have got them coming round next friday to do the survey. i just wanted to get as much info as possible as you hear about the horror stories of where it all goes wrong. although the installers of the cavity wall insulation are contractors im sure it will be a good job as...
hi all
my house gets quite cold in the winter months and looses heat quickly if i turn the heating off. i am thinking of getting cavity wall insulation installed as its on offer at the mo with British gas.
i am a little concerned about whether to get it done tho as the house is a 3 bed semi...
hi, just a quick one. I have heard that some plasterers add PVA into there multi-finish mix and I was wondering why, and what the advantages/disadvantages of doing so are.
Thanks for your reply I will try it this weekend.
On old brick work where the plaster has been knocked off but there is paint and small amounts of plaster left on the bricks is there any need to prepare it in any way or can I just dab straight to it?
Hi
I have some dot and dabbing to do in a couple of rooms. I have almost finished one room and I am not sure what to do about the window reveal. I have left the boards on the walls overlapping the window enough to create the reveals behind them and then cut the board back afterwards but I...