Recent content by stephen harvey

Thanks, I thought as much. The other thing is The tank is very small and this is wrorying me. One idea would be to place aonther cold tank about 1.5 meters above the pump and run a separate cold feed to and from it. This sounds over complicated but would be easier that knocking large wholes in...

Thanks to some forthought in loft conversion design my header tank is entombed behind a dry wall with a tiny inspection hatch. Rather that run a separate cold supply to my Shower pump, can I use a 15mm tee from the 22mm cold supply to the hot tank to supply the pump. I know this is not the best...

So is this wessex valve a real thing or will I find in the stores next to the striped paint and the sky hooks

So is this wessex valve a real thing or will I find in the stores next to the striped paint and the sky hooks

Didn't think of that, I can just about move the pipe back and down enough to make this work thanks !

I would very much like to mountnt my power shower pump on the wall vertically. From what I can gather from the physics of these things is that they need to keep wet and so I have located it such that the hot supply and cold supply will always be bearing down on the pump and the out flow is below...

I am about to connect my power shower pump to the rest of my plumbing and have taken what advice I have seen and run a separate cold supply from my header tank, however for the hot supply I have what I am told is a watrix valve which has a tee where the top is for the shower and the side...