Recent content by stesrg

Doh was never good at drawings lol but its working and thats what matters :D Eh ?

http://img.photobucket.com/albums/v425/stesrg/PRIMATICSKETCH.jpg for the plumbers who did not know :roll: Ste

http://img.photobucket.com/albums/v425/stesrg/thumb_product_range_pri.jpg Same as this one but on the left above the cold feed approx 700mm their is another feed !! the tank was £199.00 from copper cylinders telford .. Ste.

I look and see a copper bucket or similar sort of thing can see right through to the imersion element no coil in this one mate :shock: Ste

Ahhh so the 2 male connectors the other side (the one's closest together) are to be connected to the boiler ? and the top one the other side is to be blanked off and the bottom is the cold feed :P ste ....

http://img.photobucket.com/albums/v425/stesrg/toboiler.jpg And these are the male 1" fittings from the otherside of the tank which you cannot see into the tank or poke your finger through .... think these are to be connected to the boiler ? I need to know what side .... No I am not...

http://img.photobucket.com/albums/v425/stesrg/leftoftank.jpg these are the 1" female fittings with barrels fitted to them you can see into the tank .. Ste .

Sorry never looked at the link :shock: yes that is the same as what i have in the picture/diagram but on the left hand side their is only one hole the cold feed on mine their is one above 1" bsp I will try and post a photo .. Oh thank you for all your replies :D Ste

[/url] Yes I know no coil in a primatic or direct !! I have a primatic to fit this will be powered by a back boiler but it has 1 hole to many all i want is a diagram or something to fit it in !! simples .... Ste .

Hmmm i made the mistake of fitting a indirect (secondhand) and when i plummbed it in no water went to the boiler as the drian was open downstairs once the tank was full . then i removed the connectiond from the tank no water came out !! so I had to syphon all the water out of the tank to empty...

strangely this tank was fitted from new early 60s since they moved in and have never had it flushed or any problems !! although a lot of limescale it weighed in nicely :lol: Ste .

looking at several schematics of primatic tanks I am convinced that the lower 1" fittings (the ones spaced closer together) are the ones I connect to the existing boiler 28mm . the 2 fittings on the opposite side that look similar to indirect fittings I must blank the top one off and use the...

I got a new tank yes you can still get them I do not want to start ripping out tanks etc etc All I want to do is fit the new one NO RADIATORS just to heat a pensioners hot water without using the emersion heater thanks Ste

New on here so please be patient :D Ok I have removed a primatic hotwater tank from an old house because it was leaking and now have brought a new one but the new tank has more inlets/out lets than the old one !! :( the system is a back boiler no radiators so its main function is to heat the...