Recent content by steve cooper

just re read this so i could just change the sockets ive got in the van to 30ma rcd ones ?

ive got 4m of 70mm2 cable to link 4x 120ah batterys and link inverter i also run a 20 amp ctek d250sa slipt charge set up and will be adding the ctek smartpass 120 to it . will then charge at 140 amps when driving so need to have the bigger cable 4 that also plus inline 300amp fuses

its dose say you can change the neutral wire and make it floating but think i will look at a small consumer unit . ive seen one on a well known selling site with 63amp 2 pole 30ma with a 16amp and a 32 amp mcb would this be over kill ?

thanks for getting back to me the inverter dose have a 5000w surge not that it would be hitting that much if at all . here is some of what it says in manual ive found online . This is a Safety Class I product (supplied with a protective grounding terminal). The chassis must be grounded. A...

hi all new here right so am upgrading my inverter set up in my work van i use this set up for tools and camping the new inverter going in is a Victron Phoenix Inverter 12V 2000Va Smart what i am trying to work out is will i need to run it in to a 240v consumer unit RCD /MCB. my old ivereter...