Recent content by steve97

Hi , i have a ford focus 2005 titanium 1.6 petrol and a while ago i started to get abs problems. The abs light sometimes comes on then start to get juddering when braking and is now happening more frequently, any advice would be appreciated , thanks steve.

i have a creda condenser dryer excel sensor model tcs3, and has started to trip the electric ( just the circuit it is on). When started it runs for about 30 seconds then trips electric, any help would be appreciated, thanks steve

thanks seco services for info on filter, shower is working ok just wanted to check filter. Would also like to give you 10/10 for all your help, steve :)

have now fitted tco and tested shower, works fine just could do with info on how/where inlet filter is so i can check and clean it,thanks steve

i am fitting the new tco , i have cleaned shower head but where is the inlet filter, can`t see anything in the manual about it, thanks steve

will order a new tco and see how i go, just like to say big thanks to seco services for your help, steve

thanks for response just a bit concerned of doing this with power on, is there anything i can accidentally touch or keep away from as dont want to get a shock, thanks

have now checked using multimeter making contact with the tco each side where the screws are located nothing happens on the reading and dont get any tone from multimeter

thanks for reply will borrow multi-meter and check. :)

I have a triton topaz t100i electric shower , not sure how old it is as was already installed when moved in house 4years ago. Had no problems with shower until now, no matter what settings economy or high and increasing the temp on the dial i only get cold water, any help would be appreciated...

i got a leak and was told the diverter valve needs replacing, upon having this done the expansion vessel has now gone (water coming out of middle/seal of vessel) so now i need both parts replacing (the expansion vessel was ok beforehand). i have been quoted £430, does this seem alright. thanks...

i have a worcester 28cdi combi boiler, the diverter valve and the expansion vessel needs replacing, what would be the going rate to fit these parts, thanks steve97.