Recent content by Stevietee

I am looking to fit a shower pump and new shower valve on my vented system , the old valve is fed through a cupboard that backs on to the valve , the cylinder cupboard is a bit away from the bathroom ,I know the pump should be fitted at the cylinder so the pump pushes the water to the valve , if...

you will need to use 8mm toughened at least, the parts won't be cheap have you tried plumbworld .com it may be cheaper to buy a ready made unit , or maybe it's not the price and you enjoy the project side of it .

Sorry to hijack your post but is this CT1 sealer any good ,I'm looking for a good long lasting sealer for around wetwall to shower tray area , also around enclosure to tray ,most sealer are too thin and soft and peel off after a while,I have tried Mapei recently seems a bit tougher but time will...

Watch out using plastic pipe if there is evidence of mice in the house i.e chewed up lagging etc. tails up at least should be copper to protect against hoovers etc. ,hope this helped.

I wonder if anyone can advise me ,I amrenovating a bathroom next week in an old farmhouse that has a 50 year old AGA oil fired boiler /cooker, the boiler only heats the domestic hot water cylinder and an old radiator in the downstairs hall and a brass towel rail in the upstairs bathroom,the...