Recent content by StewEdwards

Still not got to the bottom of this little issue. This panel is currently set up with 3 partitions. All zones assigned to their partitions and programmed for a buzzer (no sounder) for Full Set and Part Set, Silent at Unset. Area is set to YES. (Default is NO and always think it should be YES?)...

Very many thanks gain for all the input. Have really got down into the weeds of the Installation Manual, learnt a lot about the system and always know that all the little issues are just finger trouble and perseverance will overcome them. Reluctant to just give in and call Dave or Chris at...

Very many thanks once again for the input, in response to "secureiam" It’s in the manual, that the entry times are set in option 11, 01,02,03 etc etc cover the timers quick keys to change various timers. I have mentioned a couple of times that the Timers for Entry/Exit 1/2 were previously set...

Many thanks for that but as I mentioned the entry/exit times were specifically set for Entry/Exit 1 and Entry/Exit 2 and completely different, the garage Entry/Exit 2 being 45 secs as opposed to 15 secs for the house door Entry/Exit 1 What I am not seeing is how to program the system so that the...

Very many thanks for the above response. The first issue regarding the iWise RK815DTG3 detectors not showing up on the bus was an easy fix. I looked at the wiring and they had been wired to the bus but when I opened the detectors it was obvious that they were not "bus" detectors. I swopped...

Just taken over a LightSys2 panel at a farm that has never been commissioned so I assume nothing is correctly installed. I connected it to the Configuration Software (4.1.0.008) and kept getting Thai? labels as default even though English UK is selected on both panel and software. Previously...

I have not got an "engineers manual", logged into the Risco Site and Risco Store and can see no reference to it. We have used the 259 page Full Installation Manual for reference and have certainly consulted that but to date see no reference to setting the option for System Label or System Status...

LightSys2 - 3 Partitions and both keypads on Partition 1 2 x White Elegant Keypads, Risco Product Code: RPKELPWT000B There is clearly a simple answer to this but not seeing it at the moment. The System Label has been entered in the installation but it does not display on the keypad whether...

I have just installed a LightSys2 system with 3 keypads . I have got the config software connected with the IP module so can program through keypad or software. Have just upgraded the panel to the latest Firmware RP432-3.25 ODE 12 Mar 2018 After the upgrade I have 3 partitions that now all...