What is the best way to perminately get rid of the static shocks besides putting a humidifier in the kitchen? Floor wax? or other suggestions besides taking the flooring up?
Its not the electrics had them double checked.
When you walk up & down then touch any metal you get a static shock, then tryed it with lenght of carpet ontop of floor and its fine.
Hi, has anyone experienced static shocks from laminate flooring when touching any metal objects in kitchen ie light switch, sink. (All electrics have been double checked for earthing so no faults found here.)
Any solutions to stop these shocks from happening?
Hi, has anyone experienced static shocks from laminate flooring when touching any metal objects in kitchen ie light switch, sink. (All electrics have been double checked for earthing so no faults found here.)
Any solutions to stop these shocks from happening?
The gas cooker works, but the gas fire in the frontroom flames up but after about 2 seconds turns itself off. Does this make sense? Where would this gas supply be? Thanks very much for any help
I've just had fitted a new timer control unit on my baxi 105e boiler and now i can't get the burner to start up. The ignition sparks a small flame insde the little window then straight away goes out after about 1 second. I can't get the burner to come and stay on. Please Help, Thanks
I manually pressed the switch and the boiler fired up.
So I guess the switch is alright.
By striping the dhw pressure differential value to fit the diaphragm, have you got to switch the water off and drain the system, or can you just turn the boiler off and the eleic power to it?
Thanks for...
Your Right Dave,
When turning hot water on the pin comes out about 7mm and makes contact with the DHW Switch plate. But the plate does not retract enough to make contact with the switch connection.
I've tried pulling pin out further, but that does not work.
Does the switch need replacing or...
Thank you for your feedback.
A pin comes out of the microswitch bracket on the DHW Pressure differential valve, when the hot water is turned on. But does not fire up the boiler and the hot water still does not come on.
Does this mean we need a new microswitch bracket?
When the boiler is set to either central heating or hot water the boiler does not fire up when turning taps on for hot water. (But the central heating works.) No hot water comes through taps, unless central heating is manually turned on at the boiler, (making the boiler fire up). The tap light...