Recent content by SurreyRoofingEstimator

Christ Bonders, you weren't kidding about it were you. Glad you followed my link to here from Jim's and hope you get it sorted

Is the roof damaged? If not leave it alone, it will only cause an issue if the fibres are released when the sheets are broken up. If it is only cracked it can coated with liquid systems or even overlaid with Onduline Bitumen roof sheets. Some councils will indeed remove them from...

If you do not need too many, phone and ask Russells for some `samples' to be sent to you, shouldn't cost you anything then

add Rustic red to that list (darker red than other two mentioned (and nicer))

Simplest and best way around this is to create a small inverted flat roof in front of the window covered in lead that way the pitch can be easily raised without obstructing the window

That looks bloody awful! The other option is third round hip bond, making sure that there are soakers on the plain tile side. what tile is on your neighbours roof?

There does seem some confusion on this point, agreed it was always the case that insulation above the rafter denoted as a warm roof but seems to have widened so that it is also a warm roof where the insulation follows the complete line of the rafter and the vapour control layer is below the...

True Xenon, we'd charge the same as you but on a small job like that we still have to make a certain amount per day to cover overheads so £150 labour for one man for a day, we have to order EPDM as we require it so on top of material cost there is carriage so we're nearing £300 already and then...

Most definitely put a VCL between the plasterboard and the internal insulation. It is a warm roof but is classed as a hybrid as the insulation is not over the rafter

Well, that forum member obvs isn't a roofer, you have design correct and the Klober Air is a top end breather membrane

Where damp is showing, tape some aluminium foil to the wall, if moisture appears on the foil after a while then it is condensation. The fact that it is in the corners of the room does point to condensation as that is where there is least air movement

If you've had multiple quotes that are around the same figure then that is the correct price. Sounds about the figure that we would quote as a contractor

Woody is correct that the works are notifiable and the local BC will advise of any upgrade of insulation required. We've had similar issues with vaulted ceilings and have been advised to use a product called TLX-Gold which is an insulated breather underlay plus rigid insulation between the...

You have plain tiles, look like concrete but closer photo really required. You should be able to get something to match quite readily.

Only reason to tape the joints is in a sealed roof system so as Noseall says, no need